AUTOOL BT860 Battery Tester with Printer | Professional 12V/24V Analyzer India
Authorized Dealer Free Shipping 5-Year Warranty 14-Day Returns
Autool

AUTOOL BT860 Battery Tester with Printer | Professional 12V/24V Analyzer India

Mid-range professional tester with printer. Tests battery, alternator and cranking system.

voltage
12V / 24V
test params
CCA, SOH%, SOC%, alternator, cranking
battery types
WET, AGM, GEL, EFB, LiFePO4
printer
Built-in thermal
display
Colour LCD
warranty
1 year
₹17,900
+ 18% GST
Total incl. GST: ₹21,122
Free shipping across India 14-day returns
🏅
Authorized Distributor
Official dealer since 2014
100% Genuine
Sourced directly from Autool
🛡️
Replacement Warranty
Defective unit replaced, not repaired
📞
Direct Support

Why the Autool BT860 Battery Tester?

The BT860 sits in the middle of the Autool range — professional enough for workshop use with a built-in printer, but at a lower price than the BT760. It tests the battery, alternator, and cranking system — the three components of the starting system that can leave you stranded. The thermal printer produces a professional report that includes all three test results, which can be handed to the customer to document the diagnosis.

The 4-step process explained

1
Battery Test
Conductance test measures CCA and health percentage. Results in under 10 seconds.
2
Alternator Test
Measures charging voltage (should be 13.8–14.4V) and checks for AC ripple that indicates alternator bearing wear.
3
Cranking Test
Records voltage during engine start — should not drop below 9.6V. Lower indicates a weak battery or starter motor issue.
4
Print
Generates thermal report with all three results, battery details, and date.

Step-by-step instructions

Connect clamps to battery terminals (in-vehicle).
Select battery type and enter rated CCA from the battery label.
Run battery test — results in 10 seconds.
Start the engine and run alternator test while running.
Turn off engine. Crank the engine while the tester records voltage — cranking test.
Press PRINT for the complete report.

Works with these vehicles

Compatible vehicles — common examples. If your vehicle is not listed, ask Arjun below — it almost certainly still works.
Workshop — all 12V/24V cars
Alternator + cranking test
12V/24V
All battery types including Li
LiFePO4 supported
All
Trucks and commercial vehicles
24V with printed reports
24V
Don't see your vehicle? Ask Arjun — tell him your make, model and year for a direct answer.
Not suitable for: Basic home use — simpler testers give the same info at lower cost.

vs other options

vs BT760: The BT760 adds an actual load test which is more accurate. For a busy workshop, the BT760 is worth the extra ₹4,000. vs BT880: The BT880 has no printer — the BT860 is the right choice when customer documentation is needed.

Common questions

How do I know if my battery is going to fail before it does?
Test the CCA (Cold Cranking Amps). A battery rated at 500 CCA that tests at 350 CCA (70%) is getting weak — replace it before it fails. Most professional testers show a health percentage and a clear GOOD/REPLACE result.
Can I test a battery without removing it from the car?
Yes. All testers here work in-vehicle — connect the clamps to the battery terminals without disconnecting the battery. Make sure the car is off and no large loads are running during the test.
What is the difference between CCA and Ah rating?
Ah (ampere-hours) measures storage capacity — how much energy the battery holds. CCA measures starting power — how much current it can deliver in a cold start. For testing battery health, CCA is the more important number.
Do I need a battery tester with a printer?
For home use, no. For a workshop, yes — a printed report given to the customer removes any argument about whether the battery is actually bad. It documents your diagnosis professionally.
Is naredi.in an authorized dealer?
Yes. naredi.in is the authorized distributor in India for CTEK, Rislone, OzCharge, Autool and Foxwell. Products are sourced directly from the brands — not grey market imports. Warranty is handled by naredi.in directly in India.
What is the return policy?
14-day returns from the date of delivery, hassle-free. Contact naredi.in via WhatsApp at +91 93112 11157 to initiate a return.
How long does shipping take?
Free shipping across India. Metro cities typically 2-3 days, other cities 3-5 days. Tracking is provided once dispatched.

You may also need

Not sure if this is right for your vehicle?

Tell Arjun your vehicle and situation — he'll give you a straight answer, not generic advice.

A
Arjun — naredi.in Advisor
Online now
A
Hi! I'm Arjun — naredi.in's automotive advisor. You're looking at the AUTOOL BT860 Battery Tester with Printer. What's your vehicle or question?